中文版SiteMapMail
You are here：Home > News & Events > Technical Support
Technical Support
PCB copy board equipment to select the 【PCB copy board】
Update date：2012-6-22
PCB copy board the necessary equipment is divided into the following categories: 1. Grinding equipment; scanning equipment; copy board equipment.

(1) In general, the PCB partition a variety of approaches, there are two kinds of chemical and physical methods, in general, chemical medication water treatment, but often above the line of the syrup will disposed of together, so we usually adopt physical way, the physical methods in general is polished with sand.

    Often polished is a special time and labor, often copied board company is complaining about the strength to live, many companies are using traditional sand polished by hand, but the copy board of Shenzhen East guide the use of machine polished, machine-polished much more obvious effect than the effect of artificial, and the line is clear and accurate, with the advantages of low cost, high efficiency, greatly improving the accuracy of the copy board.

Scanning is an essential step in the PCB copy board, The quality of the scan determines the copy board is good or bad, scanning is also the combination of physical and drawings, the choice of the scanning equipment is also very important, the general may be usual office use the scanner, the PCB copy board often can not be used, because the PCB copy board is particularly high pixel imaging performance requirements, so a good scanner is the most important assistant.

Scanning devices are generally PCB production software, in fact, the software is not good or bad of the points, only skilled extent divided, this proficiency based on personal preferences, select the copy board software is a good computer is essential, because the memory hog, good computer work efficiency will be greatly enhanced.
Copyright © 2010　Shenzhen EastDo Technology Co., Ltd.     TEL：+86-0755-8860 0918       E-mail：sales@pcbkey.com  service@pcbkey.com   www.pcbkey.com