Multiple PCB schematic integration method [the backstepping schematic]
Update date：2012-7-5
The integration of multiple PCB schematic for the novice is more difficult in practical work based on practical work experience of the East guided technology, we may need more than one PCB schematic linking to draw on the same PCB files, the specificthe steps are as follows: first to ensure that each schematic diagram should be placed on the interconnected ports (port), the name of the port connected to the same; 2 SCH file to create a new SCH file or open one with enough blank space;3, SCH file selected, the implementation of the Design-the Create the System From Sheet ... command, choose a SCH file, press Enter; 4, the generated box placed in the right place; 5, repeat steps 3 and 4until you are finished adding all connected to the SCH file; 6, each box has the same port (port) connected with a wire; in this SCH file to generate the netlist; 8, a new PCB file to load the generatednetwork table.
Shenzhen East guide scientific and technological aspects always a wealth of experience drawn in the schematic, schematic drawing according to a different file, such as gerber files, PCB files in multiple formats can help customers map out in detail the principles of the diagram for customer reference.
中文版